The Best ESAB Welders in 2026: 11 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
You are looking for the best ESAB welders for your specific fabrication needs. This guide compares 11 models to help you choose. ESAB offers a wide range of options, including compact 6.3-pound stick welders, heavy 91.2-pound multi-process units, and portable battery-powered rigs. The top pick is the ESAB Rogue ET 200IP PRO Pulse TIG Welder, which leads due to its high-frequency arc starting and 500 Hz pulsing in a lightweight 21-pound chassis. These selections are based strictly on the published specifications for each listing.
Quick picks
Our 11 picks
ESAB Rogue ET 200IP PRO Pulse TIG Welder
Best for: pulsed TIG welding on jobsites
- Welding Process
- TIG, Stick
- Features
- Pulse, HF Start
- Dimensions
- 19 × 14.5 × 14.3 inches
- Weight
- 21 pounds
The ESAB Rogue ET 200IP PRO TIG and Stick Welder is a portable 21-pound machine designed for precision shop and field work. It offers high-frequency TIG starts and pulse settings up to 500 Hz for tight heat management on thin stock. Power factor correction lets you run on 328-foot extension cords or generators without arc instability. It suits you if you need dedicated TIG and stick capability in an IP23S-rated enclosure.
Pros
- TIG pulse control up to 500 Hz for heat management
- High-frequency non-contact arc starting
- Power factor correction supports extension cables up to 328 feet
- Lightweight 21-pound enclosure rated to IP23S standards
Cons
- Does not support MIG welding processes
- Foot pedals and hand remotes are optional accessories rather than standard
Good fit if
- You need pulse rates up to 500 Hz to control heat input
- You run your welder from long extension leads or generators
- You require high-frequency ignition for clean TIG starts
Skip if
- You need a multi-process machine that includes MIG wire feeding
- You want remote current controls included in the base package
Verdict: ESAB Rogue ET 200IP PRO TIG and Stick Welder delivers high-frequency arc starting and 500 Hz pulsing in a 21-pound portable chassis. It provides clean arc control for stick and TIG jobs on long power runs.
ESAB Rogue Dual-Voltage Stick Welder
Best for: Dual-voltage stick welding with long extension cords
- Welding Process
- Stick
The ESAB Rogue Dual-Voltage Stick Welder runs on either 120V or 230V input power for jobsite flexibility. Built-in Power Factor Correction supports extension cables up to 300 feet, and an IP23S casing protects against shop debris. It includes dedicated 6010 electrode settings and pulse stick capability to manage heat input on thinner metals. This compact machine suits you if you need reliable stick welding on varied power supplies.
Pros
- Dual-voltage operation on 120V and 230V circuits
- PFC circuitry supports extension cords up to 300 feet
- Pulse SMAW mode for heat control on thin workpieces
- Dedicated operational mode for 6010 stick electrodes
- IP23S rated housing for shop and field durability
Cons
- Limited strictly to stick welding with no wire feed or TIG support listed
- Analogue remote control is sold separately
- Requires a 7kW generator for optimal off-grid power
Good fit if
- You need to run stick welds on both 120V and 230V outlets.
- You run work leads off long extension cords up to 300 feet.
- You frequently use 6010 electrodes or require pulsed stick welding.
Skip if
- You need a multi-process welder with MIG or TIG capabilities.
- You require an included remote amperage control out of the box.
Verdict: ESAB Rogue Dual-Voltage Stick Welder delivers focused stick performance with specialized 6010 arc settings and dual-voltage versatility. It provides steady arc control across jobsite extension leads and generator setups.
ESAB HandyArc 1/8-Inch Stick Welder
Best for: portable stick welding with 1/8-inch electrodes
- Welding Process
- Stick
- Dimensions
- 10.3 × 7.1 × 4.5 inches
- Weight
- 6.3 pounds
The ESAB HandyArc 1/8-Inch Stick Welder gives you a compact stick welding option built around an inverter power source. It weighs 6.3 pounds and measures 10.3 inches long, 7.1 inches wide, and 4.5 inches high. It runs electrodes up to 1/8 inch, including 6013 rods, and includes welding accessories in the box. This unit suits you if you need a lightweight, dedicated stick machine for basic repairs and portable shop tasks.
Pros
- Weighs 6.3 pounds for easy transport
- Compact dimensions of 10.3 by 7.1 by 4.5 inches
- Handles up to 1/8-inch electrodes, including 6013 types
- Welding accessories included in the package
Cons
- Limited to stick welding with no MIG or TIG support
- Does not run electrodes larger than 1/8 inch
Good fit if
- You need an ultra-lightweight stick welder under 7 pounds.
- You weld with 6013 or electrodes up to 1/8 inch in size.
- You want a dedicated stick unit that comes with accessories.
Skip if
- You require MIG or TIG welding processes.
- You need to run electrodes thicker than 1/8 inch.
Verdict: ESAB HandyArc 1/8-Inch Stick Welder delivers portable stick welding in a 6.3-pound chassis designed for 1/8-inch and 6013 electrodes. It provides a straightforward, space-saving choice when you only need stick capability.
ESAB Rebel EMP 205ic AC/DC Multi-Process Welder
Best for: multi-process fabrication including AC aluminum TIG
- Welding Process
- TIG, Stick, MIG, Multi-Process
- Current Type
- AC/DC
- Weight
- 91.2 pounds
View on Amazon: ESAB Rebel EMP 205ic AC/DC Multi-Process Welder
This multi-process machine runs MIG, flux-cored, stick, and both AC and DC TIG on one power source. You get high-frequency arc starting, adjustable AC balance and frequency, plus pulse DC for precision work. The five-handle roll cage protects a 49-pound unit equipped with a color TFT screen and four memory slots per process. It suits fabricators needing a single unit for steel, stainless, and aluminum jobs.
Pros
- Supports MIG, Flux-Cored, Stick including 6010, DC TIG, and AC TIG
- High-frequency arc start in DC and AC modes with pulse DC
- TFT screen features four programmable memory locations per process
- Five-handle roll cage protects the 49-pound machine body
Cons
- Total package weight reaches 91.2 pounds
- Limits programmable memory to four slots per process
Good fit if
- You need AC TIG capability for aluminum alongside standard MIG and stick welding
- You require high-frequency non-contact arc starts and pulse DC control
- You want saved memory channels to recall specific parameters quickly
Skip if
- You only need direct-current welding and never work on AC aluminum
- You prefer dedicated single-process equipment without complex digital menus
Verdict: ESAB Rebel EMP 205ic AC/DC Welder delivers true multi-process performance with dedicated AC and DC TIG adjustments in a rugged roll-cage frame. It gives you full control over arc parameters and custom presets across every supported process.
ESAB Rogue EM 140 120V MIG and Flux-Core Welder
Best for: 120V MIG and flux-core welding
- Welding Process
- MIG, Flux Core
- Amperage
- 140A
- Input Voltage
- 120V
View on Amazon: ESAB Rogue EM 140 120V MIG and Flux-Core Welder
The ESAB Rogue EM 140 is a compact welder designed for MIG and flux-core welding processes. It operates strictly on a 120V input voltage and delivers up to 140A of maximum output. You get wire-feed capability without requiring high-voltage shop power. It suits you if you need a straightforward 120V machine for wire welding jobs where a 140A ceiling meets your project requirements.
Pros
- Runs on standard 120V input power
- Supports both MIG and flux-core welding processes
- Provides up to 140A of welding output
Cons
- Limited to 120V input with no 230V dual-voltage support listed
- Does not support stick or TIG welding processes
Good fit if
- You need a dedicated MIG and flux-core machine.
- You only have access to 120V input power.
- You need a maximum output of 140A for your projects.
Skip if
- You need 230V input power for higher output.
- You require TIG or stick welding capability.
Verdict: ESAB Rogue EM 140 MIG/Flux-Core Welder delivers dedicated wire welding with up to 140A output on standard 120V power. It is an ideal option when you require a simple 120V flux-core and MIG setup without multi-process complexity.
ESAB Rogue EM 210 PRO MIG Welder
Best for: Dedicated synergic MIG and flux-cored fabrication
- Welding Process
- MIG
The ESAB Rogue EM 210 PRO is a dedicated MIG and flux-cored welding machine designed for steel and stainless work. It features a 5.0-inch TFT screen, single-knob synergic parameter controls, and 10 onboard job memory slots. Built-in Power Factor Correction stabilizes the arc on extension cables up to 328 feet. This unit suits fabricators who prioritize specialized MIG setup options and portable job-site power stability over multi-process flexibility.
Pros
- 5.0-inch color TFT display with single-knob synergic control
- Power Factor Correction maintains arc stability on cables up to 328 feet
- Arc Dynamics control adjusts arc stiffness for carbon or stainless steel
- 10-job memory slots for saving and recalling weld settings
Cons
- Supports MIG and flux-cored processes only without stick or TIG modes
- Spool gun required for aluminum work is sold separately
Good fit if
- You need synergic MIG, manual MIG, MIG brazing, or flux-cored capability.
- You run equipment on long power extension leads up to 328 feet.
- You want onboard memory to save up to 10 custom weld settings.
Skip if
- You need a multi-process welder that includes stick or TIG functions.
- You require an out-of-the-box spool gun included in the package.
Verdict: ESAB Rogue EM 210 PRO MIG Welder provides dedicated MIG and flux-cored performance with clean digital controls and long-cable arc stability. It delivers precise parameter tuning for steel fabrication without multi-process complications.
ESAB Renegade VOLT Stick and TIG Welder
Best for: cordless Stick and TIG field welding
- Welding Process
- TIG, Stick
- Power Source
- Battery Powered
- Dimensions
- 19 × 9 × 19 inches
- Weight
- 90 pounds
This cordless Stick and TIG machine runs on either battery power or 230V mains. You get up to 140 A on battery power and 200 A when plugged into an AC outlet. It includes four DeWALT FLEXVOLT 12Ah batteries and features an AMP+ hybrid mode for added boost. This setup suits you if you need to weld in locations without immediate electrical outlets.
Pros
- Delivers up to 140 A on battery power and 200 A on 230V mains
- Includes four DeWALT FLEXVOLT 20V/60V 12Ah batteries
- AMP+ hybrid mode provides extra power boost
- Interface includes memory storage for welding parameters
Cons
- Listed weight is 90 pounds
- Maximum output is limited to 140 A when running on battery power alone
- Supports only Stick and TIG welding without MIG capability
Good fit if
- You need cordless Stick or TIG capability away from standard power grids.
- You want the option to run on 230V mains for higher amperage up to 200 A.
- You want an included set of four 12Ah rechargeable batteries.
Skip if
- You require MIG or flux-core welding processes.
- You need a machine lighter than 90 pounds for easy carrying.
Verdict: ESAB Renegade VOLT Stick and TIG Welder delivers dual power flexibility across battery packs and 230V AC lines. It gives you dependable cordless Stick and TIG performance away from standard wall outlets.
ESAB Rogue EM 125 MIG Welder
Best for: portable 120V MIG welding on household power
- Welding Process
- MIG
- Input Voltage
- 120V
The ESAB Rogue EM 125 is a dedicated 120V MIG welder designed for light-duty fabrication. It delivers up to 125 amps of welding output and weighs 27 pounds for easy transport around your workspace. The front panel features a 14-segment display showing real-time voltage and wire feed speed. It suits you if you need a portable wire-feed machine that runs on standard household electrical outlets.
Pros
- Weighs 27 lbs with multiple lift points for transport
- 14-segment display shows live voltage and wire feed speed
- Operates on standard 120V input power
- Includes 10 ft MIG gun, regulator, tips, and wire spool
Cons
- Supports MIG only without Stick or TIG options
- Maximum welding output limited to 125 amps
- Lacks 230V dual-voltage input support
Good fit if
- You need a dedicated MIG machine powered by standard 120V outlets.
- You want a compact 27 lb welder with integrated cable management.
- You prefer real-time digital readouts for voltage and wire feed speed.
Skip if
- You need Stick or TIG welding capability in one machine.
- You require more than 125 amps for thicker materials.
- You work with 230V power sources.
Verdict: ESAB Rogue EM 125 120V MIG Welder provides 125 amps of wire-feed output in a lightweight 27-pound frame. It is an effective dedicated MIG choice if you only use 120V power outlets.
ESAB Rebel EMP 235ic Multi-Process Welder with Cart
Best for: multi-process shop and site welding
- Dimensions
- 26.5 × 11.5 × 19.5 inches
- Weight
- 53 pounds
View on Amazon: ESAB Rebel EMP 235ic Multi-Process Welder with Cart
The ESAB Rebel EMP 235ic Multi-Process Welder with Cart delivers MIG, TIG, and stick welding capabilities in a 53-pound package. It features dual-voltage operation, a four-handle roll cage, and sMIG technology for automatic arc tuning using plate thickness and wire size. A detachable cart lets you roll the unit around a shop or move the power source solo. This setup suits you if you need multi-process versatility with mobile shop handling.
Pros
- Supports MIG, TIG, and stick welding processes
- Dual-voltage input capability
- Detachable cart and four-handle roll cage design
- sMIG technology tunes arc to wire diameter and plate thickness
Cons
- Weighs 53 pounds before factoring in the cart
- Large 26.5-inch length requires dedicated storage space
Good fit if
- You switch regularly between MIG, TIG, and stick welding
- You want a wheeled setup that unlatches for portable field use
- You need dual-voltage support across shop and site outlets
Skip if
- You need a dedicated ultra-lightweight welder under 50 pounds
- You only require a basic single-process machine
Verdict: ESAB Rebel EMP 235ic Multi-Process Welder with Cart combines three welding processes with dual-voltage support and cart mobility. It gives you flexible shop transport alongside portable job-site power.
ESAB Rebel EMP 235ic Multi-Process Welder
Best for: multi-process MIG, Stick, and TIG fabrication
- Welding Process
- TIG, Stick, MIG
The ESAB Rebel EMP 235ic Multi-Process Welder gives you three core welding capabilities in one package. It supports MIG, Stick, and TIG processes, allowing you to tackle multiple shop tasks with a single power source. If you need a versatile setup that handles different welding techniques without switching between separate dedicated units, this configuration suits your demands.
Pros
- Supports MIG welding
- Supports Stick welding
- Supports TIG welding
Cons
- No mobile cart listed in package
- Duty cycle specifications not provided
Good fit if
- You need a single unit capable of MIG, Stick, and TIG welding.
- You want an ESAB Rebel EMP 235ic platform for varied shop jobs.
Skip if
- You only need a single dedicated welding process.
- You require a bundled cart with your machine.
Verdict: ESAB Rebel EMP 235ic Multi-Process Welder provides MIG, Stick, and TIG capabilities in a single setup. It fits shops needing three welding methods from one machine.
ESAB EMP 210 Multi-Process Welder
Best for: dual-voltage 200A multi-process workshop welding
- Welding Process
- TIG, Stick, MIG, Multi-Process
- Amperage
- 200A
- Dimensions
- 23 × 18.5 × 18 inches
- Weight
- 43 pounds
The ESAB EMP 210 is a multi-process welder running on 120V or 230V input. It supplies up to 200 amps for MIG, Stick, and TIG applications. At 43 pounds, you get three welding processes in a single DC unit measuring 23 by 18.5 by 18 inches. This machine suits you if you need flexible dual-voltage power and multi-process versatility across shop tasks.
Pros
- Supports MIG, Stick, and TIG welding processes
- Dual-voltage input handles both 120V and 230V lines
- Delivers up to 200A maximum welding output
- Weighs 43 pounds for portable multi-process operation
Cons
- Limited to DC output with no AC TIG listed
- Weighs more than dedicated single-process portable welders
Good fit if
- You need MIG, Stick, and TIG capabilities in one unit.
- You switch between 120V and 230V power supplies.
- You require up to 200 amps of DC welding power.
Skip if
- You need AC welding output for TIG jobs.
- You require more than 200 amps of welding current.
Verdict: ESAB EMP 210 Multi-Process Welder delivers MIG, Stick, and TIG capabilities with 200 amps of maximum output on dual-voltage power. It provides a compact 43-pound platform for shops needing multi-process DC capability.
Specifications side by side
| Spec | ESAB Rogue ET 200IP PRO Pulse TIG Welder | ESAB Rogue Dual-Voltage Stick Welder | ESAB HandyArc 1/8-Inch Stick Welder | ESAB Rebel EMP 205ic AC/DC Multi-Process Welder | ESAB Rogue EM 140 120V MIG and Flux-Core Welder | ESAB Rogue EM 210 PRO MIG Welder | ESAB Renegade VOLT Stick and TIG Welder | ESAB Rogue EM 125 MIG Welder | ESAB Rebel EMP 235ic Multi-Process Welder with Cart | ESAB Rebel EMP 235ic Multi-Process Welder | ESAB EMP 210 Multi-Process Welder |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Welding Process | TIG, Stick | Stick | Stick | TIG, Stick, MIG, Multi-Process | MIG, Flux Core | MIG | TIG, Stick | MIG | not specified | TIG, Stick, MIG | TIG, Stick, MIG, Multi-Process |
| Amperage | not specified | not specified | not specified | not specified | 140A | not specified | not specified | not specified | not specified | not specified | 200A |
| Input Voltage | not specified | not specified | not specified | not specified | 120V | not specified | not specified | 120V | not specified | not specified | not specified |
| Current Type | not specified | not specified | not specified | AC/DC | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Features | Pulse, HF Start | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified | not specified |
| Power Source | not specified | not specified | not specified | not specified | not specified | not specified | Battery Powered | not specified | not specified | not specified | not specified |
| Dimensions | 19 × 14.5 × 14.3 inches | not specified | 10.3 × 7.1 × 4.5 inches | not specified | not specified | not specified | 19 × 9 × 19 inches | not specified | 26.5 × 11.5 × 19.5 inches | not specified | 23 × 18.5 × 18 inches |
| Weight | 21 pounds | not specified | 6.3 pounds | 91.2 pounds | not specified | not specified | 90 pounds | not specified | 53 pounds | not specified | 43 pounds |
| Model | 700500073 | 705002021 | 700734012 | 0558102553 | 700301082 | 0700301085 | 447800880 | 700301081 | 558012704 | 558012702 | 0700503200 |
| Color | not specified | Black/Yellow | Black/Yellow | Black | Black | Yellow/Black | Multicolor | Black | Multicolor | not specified | Copper |
| Size | not specified | not specified | not specified | not specified | not specified | EM | not specified | not specified | not specified | not specified | not specified |
ESAB Welder Lineup by Process
The ESAB lineup spans diverse welding processes to match your workflow. The Rebel EMP 205ic AC/DC and EMP 235ic handle MIG, Stick, and TIG tasks, making them ideal for multi-process fabrication shops. If you need dedicated wire welding, the Rogue EM 140 and EM 210 PRO offer focused MIG and flux-core performance on 120V power.
For specialized jobs, the Rogue ET 200IP PRO delivers high-frequency TIG pulsing, while the Renegade VOLT provides cordless Stick and TIG capability. The HandyArc 1/8-Inch Stick Welder suits those needing lightweight portability. You can select based on required amperage, current type, or input voltage flexibility.
Where ESAB Fits Your Needs
ESAB covers the full spectrum of portable welding. You can choose a 6.3-pound HandyArc for basic stick work or a 91.2-pound Rebel EMP for complex multi-process fabrication. The range includes lightweight 21-pound TIG units, compact 27-pound MIG welders, and a 90-pound battery-powered Renegade for field use. Most models are compact boxes or carts. You will not find large industrial cabinet welders here. The lineup also lacks dedicated plasma cutters. This brand suits users who need versatile, transportable tools for shops or job sites rather than fixed, high-amperage stationary equipment.
If you need audio equipment for your workshop, you can review specifications for soundcore over ear headphones.
How to Choose the Right ESAB Welder
-
Match the Welding Process
Select the machine based on the specific welding processes you need most often. If you require TIG, Stick, and MIG capabilities, the Rebel EMP 205ic AC/DC Multi-Process Welder supports all three in a single rugged unit. For dedicated MIG work, the Rogue EM 140 provides simple 120V wire welding without multi-process complexity. The HandyArc Stick Welder is a straightforward choice if you only need basic stick electrode work. Align the process with your daily tasks to avoid paying for unused features.
-
Check Amperage Requirements
Ensure the machine delivers enough amperage for your thickest materials. The Rebel EMP 210 Multi-Process Welder offers 200 amps of maximum output, making it suitable for heavier fabrication jobs in a workshop setting. If you only need lighter duty work, the Rogue EM 140 provides 140 amps on standard household power. The Rogue EM 125 MIG Welder offers 125 amps for thinner metals. Choosing the correct amperage ensures you can handle your material thickness without overheating the unit or struggling with arc stability.
-
Verify Input Voltage
Confirm the machine works with your available power source. The Rogue EM 140 and Rogue EM 125 MIG Welders are designed for standard 120V outlets, making them ideal for home garages or sites with limited power. The Rebel EMP 235ic Multi-Process Welder supports dual-voltage input, offering flexibility for different job sites. If you work in remote locations without reliable grid power, the Renegade VOLT Stick and TIG Welder operates on battery packs. Matching the input voltage to your site prevents power issues.
-
Consider Portability
Weight and dimensions matter if you move equipment frequently. The HandyArc Stick Welder weighs just 6.3 pounds and fits in small spaces, perfect for field repairs. The Rogue ET 200IP PRO Pulse TIG Welder weighs 21 pounds, offering a balance of power and portability for jobsite use. In contrast, the Rebel EMP 205ic AC/DC Multi-Process Welder weighs 91.2 pounds, indicating it is best suited for stationary shop use. The Renegade VOLT weighs 90 pounds despite its battery capability. Choose a weight that matches your transport needs.
-
Evaluate Special Features
Look for features that improve arc control and ease of use. The Rogue ET 200IP PRO includes high-frequency arc starting and 500 Hz pulsing, which provides clean arc control for precise TIG and Stick jobs. The Rebel EMP 205ic offers dedicated AC and DC TIG adjustments for aluminum welding. The Rogue EM 210 PRO provides clean digital controls for precise parameter tuning in steel fabrication. These features reduce slag and improve bead quality. Select a machine with the specific controls that match your skill level and material type.
Frequently asked questions
What is the best ESAB welder for pulsed TIG on jobsites?
The ESAB Rogue ET 200IP PRO is the top choice for this task. It features high-frequency arc starting and 500 Hz pulsing for clean control. Weighing only 21 pounds, it fits in a portable chassis for long power runs. This model supports both TIG and Stick processes for versatile field use.
Which ESAB welder works best with long extension cords?
The ESAB Rogue Dual-Voltage Stick Welder is designed for this scenario. It offers dual-voltage versatility to handle long extension leads and generator setups. The unit includes specialized 6010 arc settings for focused stick performance. This ensures steady arc control even when power sources are distant from your work area.
Is there a lightweight ESAB welder for portable stick work?
Yes, the ESAB HandyArc 1/8-Inch Stick Welder is the most compact option. It weighs just 6.3 pounds and measures 10.3 inches long. The chassis is designed specifically for 1/8-inch and 6013 electrodes. This makes it a straightforward, space-saving choice when you only need basic stick capability in tight spaces.
What is the best ESAB welder for AC aluminum TIG?
The ESAB Rebel EMP 205ic AC/DC Multi-Process Welder is ideal for aluminum. It provides dedicated AC and DC TIG adjustments for full arc parameter control. The unit sits in a rugged roll-cage frame with custom presets. This setup handles complex multi-process fabrication, including AC aluminum TIG welding, with precision.
Which ESAB welder is best for 120V MIG and flux-core?
The ESAB Rogue EM 140 is the best dedicated option for 120V power. It delivers up to 140A output on standard household circuits. This machine focuses solely on MIG and flux-core processes without multi-process complexity. It is an effective choice for simple wire welding tasks that require basic 120V setups.
Does ESAB make a battery-powered welder for cordless field work?
The ESAB Renegade VOLT is their battery-powered solution for cordless welding. It supports both Stick and TIG processes using battery packs or 230V AC lines. While it weighs 90 pounds, it provides dependable performance away from wall outlets. This unit offers dual power flexibility for field welding applications.
What is the best ESAB welder for dedicated synergic MIG?
The ESAB Rogue EM 210 PRO MIG Welder is built for this. It provides dedicated MIG and flux-cored performance with clean digital controls. The unit offers long-cable arc stability and precise parameter tuning for steel fabrication. This machine avoids multi-process complications, focusing entirely on synergic MIG welding tasks.
Which ESAB welder includes a cart for shop mobility?
The ESAB Rebel EMP 235ic Multi-Process Welder with Cart includes this feature. It combines MIG, Stick, and TIG capabilities with dual-voltage support. The integrated cart allows for flexible shop transport alongside portable job-site power. This setup is ideal for shops needing three welding methods with easy mobility.