Everlast Welders Canada Welders: 15 Picks Ranked by Specs
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Finding the best everlast welders canada welders requires comparing their published specifications. This guide ranks 15 models from the brand based strictly on those specs. Everlast Welders Canada offers TIG, MIG, Stick, and plasma cutting machines in various sizes and weights. The Everlast PowerTIG 200A AC/DC Welder leads because it provides versatile AC and DC workshop TIG fabrication with 200-amp dual-voltage operation. We selected these picks by analyzing amperage, input voltage, and current type. Each model serves a specific need, from compact home units to heavy-duty professional tools. You can choose based on the exact requirements of your project.
Quick picks
Our 15 picks
Everlast PowerTIG 200A AC/DC Welder
Best for: versatile AC and DC workshop TIG fabrication
- Amperage
- 200A
- Input Voltage
- Dual Voltage
- Current Type
- AC/DC
- Features
- Pulse
- Dimensions
- 24 × 9 × 17 inches
- Weight
- 60 pounds
View on Amazon: Everlast PowerTIG 200A AC/DC Welder Affiliate link
The Everlast PowerTIG 200A AC/DC Pulse Welder delivers up to 200 amps on dual 120V and 240V input lines. You get an IGBT inverter setup with AC and DC output, pulse capability, lift start, and low-amperage arc starts down to 5 amps DC and 20 amps AC. It features pre- and post-flow gas controls plus arc force adjustment. You will find it suits your shop if you need versatile TIG performance across multiple metals.
Pros
- Dual-voltage support for 120V and 240V power sources
- Low DC start amperage down to 5 amps
- Adjustable pre-flow and post-flow gas control with arc force
- Lift start function for environments where high-frequency start is not suitable
Cons
- Weighs 60 pounds, making transport between job sites heavy
- Minimum start amperage on AC output starts at 20 amps rather than 5 amps
Good fit if
- You need a 200-amp AC/DC machine that operates on both 120V and 240V outlets.
- You weld thin material requiring low DC starts down to 5 amps.
- You want pulse settings and adjustable gas pre-flow and post-flow controls.
Skip if
- You need a lightweight machine under 50 pounds for frequent portability.
- You require arc initiation below 20 amps while operating in AC mode.
Verdict: Everlast PowerTIG 200A AC/DC Pulse Welder provides robust 200-amp dual-voltage operation with precise gas control for workshop fabrication. It delivers dependable arc starts and pulse adjustments across both AC and DC welding tasks.
Everlast PowerTIG Dual Voltage TIG Welder
Best for: aluminum and steel TIG welding projects
- Input Voltage
- Dual Voltage
- Features
- Foot Pedal
- Dimensions
- 25 × 5 × 14 inches
- Weight
- 40 pounds
View on Amazon: Everlast PowerTIG Dual Voltage TIG Welder Affiliate link
This dual-voltage machine delivers AC and DC TIG alongside a 150-amp stick welding mode. It features an IGBT inverter, adjustable AC frequency from 20 to 250 Hz, and AC balance control between 10 and 90 percent. A foot pedal package provides output control, while starting arcs run at 5 amps on DC and 20 amps on AC. It suits you if you need fine arc shaping for aluminum and steel.
Pros
- AC frequency adjusts from 20 to 250 Hz
- AC balance control ranges from 10% to 90%
- Low 5-amp DC starting capability
- Foot pedal included in the package
Cons
- Stick welding output limited to 150 amps
- AC start current does not drop below 20 amps
Good fit if
- You need adjustable AC frequency and balance for aluminum work.
- You want foot pedal control paired with dual-voltage input.
- You require low-amperage DC starts down to 5 amps.
Skip if
- You need stick welding output higher than 150 amps.
- You require starting arcs below 20 amps on AC.
Verdict: Everlast PowerTIG Dual Voltage TIG Welder gives you precise AC and DC arc shaping with an included foot pedal. It delivers broad frequency control and stick capability in a 40-pound frame.
Everlast PowerTIG 210A TIG Stick Welder
Best for: precise AC and DC TIG pulse welding
- Welding Process
- TIG, Stick
- Input Voltage
- 220V
- Current Type
- DC
- Features
- Pulse, IGBT Inverter
- Dimensions
- 24 × 9 × 17 inches
- Weight
- 60 pounds
View on Amazon: Everlast PowerTIG 210A TIG Stick Welder Affiliate link
The Everlast PowerTIG 210 AC/DC Welder gives you up to 210 amps for TIG and stick jobs. You get microprocessor control, three alternating-current wave forms, and nine memory channels to save your settings. The advanced pulse mode helps you manage heat on thin materials. Weighing 60 pounds, it suits you if you need fine control across direct and alternating current welding tasks.
Pros
- Three AC wave forms: Triangular, Advanced Square, and Soft Square
- Advanced Pulse and standard pulse options for AC and DC modes
- Programmable memory stores parameters for up to 9 programs
- Electronic HV Start and Lift Arc eliminate point-gap components
Cons
- Weighs 60 pounds, limiting single-hand mobility
- Finger amp control torch is optional rather than standard
- Does not support MIG welding processes
Good fit if
- You need advanced pulse settings to weld thin materials with less warping.
- You want programmable memory to save up to 9 parameter sets.
- You require selectable AC wave shapes for specific TIG applications.
Skip if
- You need a multi-process machine that includes MIG wire feeding.
- You want an ultra-light welder weighing less than 50 pounds.
Verdict: Everlast PowerTIG 210 AC/DC Welder delivers comprehensive wave form shaping and digital pulse parameters for precise TIG tasks. It provides deep parameter control when you need repeatable memory presets and reduced heat input.
Everlast Cyclone 140 110V MIG Welder
Best for: 110V home and DIY flux core welding
- Welding Process
- MIG, Flux Core
- Amperage
- 140A
- Input Voltage
- 110V
- Application
- Home
- Dimensions
- 17 × 8 × 14 inches
- Weight
- 25 pounds
View on Amazon: Everlast Cyclone 140 110V MIG Welder Affiliate link
The Everlast Cyclone 140 110V MIG Welder is an IGBT inverter machine built for MIG and flux core welding. Running on standard 110V household power, it delivers up to 140 amps with a 35 percent duty cycle at 135 amps. It accommodates both 4-inch and 8-inch wire spools and weighs 25 pounds. You get stepless controls for voltage and wire feed speed, making it suitable for home repairs and DIY shop tasks.
Pros
- Runs on standard 110V household power
- Stepless wire feed speed and voltage controls without tapped settings
- Supports both 4-inch and 8-inch wire spools
- Spool gun ready with cast alloy drive roller
- Portable 25-pound inverter chassis
Cons
- No 220V dual-voltage input capability
- Maximum output limited to 140 amps
- Drive rolls support wire only up to .035 inches
Good fit if
- You need a portable 25-pound flux core and MIG machine for standard 110V outlets.
- You want continuous, stepless voltage and wire feed adjustment instead of tapped steps.
- You plan to run either 4-inch or 8-inch wire spools on DIY home projects.
Skip if
- You require 220V input power for welding thicker metals.
- You need more than 140 amps of welding output.
- You plan to feed wire diameters exceeding .035 inches.
Verdict: Everlast Cyclone 140 110V MIG Welder delivers a compact 25-pound setup with stepless adjustment and spool gun compatibility for 110V home welding. Its 140-amp output and 35 percent duty cycle provide solid power for DIY MIG and flux core projects.
Everlast Typhoon AC/DC Pulse TIG Welder
Best for: professional TIG and Stick welding
- Welding Process
- TIG, Stick
- Input Voltage
- Dual Voltage
- Current Type
- AC/DC
- Features
- Pulse, IGBT Inverter
- Weight
- 65 pounds
View on Amazon: Everlast Typhoon AC/DC Pulse TIG Welder Affiliate link
The Typhoon 230 is a dual-voltage TIG and Stick welder built for professional use. It delivers 230 amps for TIG and 200 amps for Stick, maintaining a 70% duty cycle at maximum output. You get advanced AC waveforms and high-frequency pulse capabilities for precise control. The package includes both air-cooled and water-cooled torches along with a foot pedal. This unit suits welders needing robust performance and versatile process options.
Pros
- 70% duty cycle at 230A TIG output
- Dual 120/240V input voltage compatibility
- Includes air-cooled and water-cooled TIG torches
- Five advanced AC waveform options for puddle control
Cons
- Heavier at 65 pounds than lighter home units
- No MIG welding process capability listed
- Limited to TIG and Stick processes only
Good fit if
- You need high-duty-cycle performance for professional work
- You require both AC and DC TIG capabilities
- You want included water-cooled and air-cooled torches
Skip if
- You primarily weld aluminum with a standard AC setup
- You need a lightweight unit for frequent travel
- You require MIG welding functionality
Verdict: Everlast Typhoon 230 TIG/Stick Welder fits professionals who need high-duty-cycle TIG performance and versatile AC waveform control. It is a heavy, process-specific tool for serious TIG and Stick work.
Everlast PowerTIG 255EXT AC/DC TIG Welder
Best for: precision AC/DC TIG and advanced aluminum welding
- Welding Process
- TIG, Stick
- Input Voltage
- Dual Voltage
- Current Type
- AC/DC
- Features
- Pulse
- Weight
- 85 pounds
View on Amazon: Everlast PowerTIG 255EXT AC/DC TIG Welder Affiliate link
The Everlast PowerTIG 255EXT AC/DC TIG Welder is a dual-voltage inverter machine built for dedicated TIG and stick work. It supports low-amperage operation starting at 3 amps DC and 5 amps AC, alongside pulse frequencies up to 500 Hz. You also get four AC waveforms for arc shaping and dedicated 6010 stick capability. It suits you if you need fine arc stability for thin metals or specialized aluminum fabrication.
Pros
- Low starting output down to 3A DC and 5A AC
- Pulse rates up to 500Hz in DC and 250Hz in AC
- Four AC waveforms: Sine, Triangular, Soft Square, and Advanced Square
- Dual-voltage operation on 110V and 220V power
- Dedicated 6010 cellulose stick capability and VRD function
Cons
- Heavy unit weight at 85 pounds
- No MIG welding or plasma cutting capability
Good fit if
- You need low-amperage arc starts down to 3 amps for thin sheet metal.
- You want multiple AC waveforms and high-frequency pulsing for aluminum work.
- You run 6010 cellulose stick electrodes alongside precision TIG.
Skip if
- You need a lightweight, highly portable welder under 50 pounds.
- You need an all-in-one multi-process machine that includes MIG welding.
Verdict: Everlast PowerTIG 255EXT AC/DC TIG Welder delivers deep parameter control with dual-voltage flexibility, low-amp starts, and four AC waveforms. It is a capable choice when you need specialized TIG arc shaping and stick welding support.
Everlast Thunder 215 Multi-Process Welder
Best for: versatile dual-voltage DC multi-process welding
- Welding Process
- TIG, Stick, MIG, Multi-Process
- Amperage
- 200A
- Input Voltage
- Dual Voltage
- Weight
- 57.1 pounds
View on Amazon: Everlast Thunder 215 Multi-Process Welder Affiliate link
The Everlast Thunder 215 Multi-Process Welder delivers up to 200 amps across MIG, TIG, and Stick welding processes. It features dual-voltage capability for 110V and 220V power sources, along with a digital DC CC/CV design. Built-in Arc Force, Burn Back control, and a nine-setting memory function streamline setup. At 57.1 pounds, it suits you if you need a versatile three-in-one DC welder for shop tasks.
Pros
- Supports MIG, Stick, and TIG welding processes up to 200A
- Dual-voltage input operates on both 110V and 220V power
- Memory function stores up to 9 custom operational settings
- Offers both High Frequency and Lift Start modes for TIG
- Includes adjustable Arc Force and Burn Back controls
Cons
- DC-only output excludes AC TIG capability
- Total weight of 57.1 pounds limits single-hand portability
Good fit if
- You need a single machine for MIG, DC TIG, and Stick tasks.
- You run equipment on both 110V and 220V power sources.
- You want preset memory channels to save frequent machine parameters.
Skip if
- You require AC TIG output to weld aluminum.
- You need an ultralight power source under 50 pounds.
Verdict: Everlast Thunder 215 Multi-Process Welder provides flexible 200-amp multi-process performance across 110V and 220V inputs with dedicated memory presets. Its DC-only design limits non-ferrous TIG work, but handles general multi-process steel fabrication reliably.
Everlast Cyclone Dual-Voltage MIG Welder
Best for: dual-voltage 180-amp MIG and stick welding
- Welding Process
- Stick, MIG
- Amperage
- 180A
- Input Voltage
- Dual Voltage
- Features
- IGBT Inverter
View on Amazon: Everlast Cyclone Dual-Voltage MIG Welder Affiliate link
This Everlast Cyclone unit is a dual-voltage MIG and stick welder running on 120V or 240V power. You get up to 200 max amps with a rated 25% duty cycle at 180 amps. It features digital IGBT inverter controls, a clear LCD display, and PowerSet setup assistance. You can run flux-cored or solid wire, making it suitable if you need flexible shop or garage fabrication with multiple input voltages.
Pros
- Dual-voltage operation supports 120V and 240V input
- Delivers up to 200 amps with a 25% duty cycle at 180 amps
- PowerSet mode and digital LCD display streamline parameter setup
- Supports spool gun operation and both MIG and stick processes
Cons
- Stick electrode holder is optional and not included as standard
- Drive rolls for solid wire up to .035 inches are optional
Good fit if
- You need a 180-amp class welder that operates on 120V or 240V power.
- You want MIG and stick versatility with spool gun compatibility.
- You prefer guided setup features like PowerSet mode and digital LCD readouts.
Skip if
- You require an included stick electrode holder straight out of the box.
- You need a machine with dedicated TIG welding capabilities.
Verdict: Everlast Cyclone Dual-Voltage MIG Welder delivers reliable 180-amp MIG and stick performance across 120V and 240V circuits. Its digital IGBT inverter and PowerSet mode make it a practical choice for versatile shop metalwork.
Everlast PowerPlasma 82i CNC Plasma Cutter
Best for: CNC table cutting on thick steel
- Features
- Plasma Cutter
- Dimensions
- 22 × 9 × 17 inches
- Weight
- 53 pounds
View on Amazon: Everlast PowerPlasma 82i CNC Plasma Cutter Affiliate link
The Everlast PowerPlasma 82i CNC Plasma Cutter is an 80-amp machine torch setup designed for mechanized metal cutting. It delivers an 80A output at a 60 percent duty cycle and handles steel up to 1-1/4 inches thick at 10 to 12 IPM. With a 24-foot machine torch cable, blowback arc start, and post-flow control, you get a dedicated setup for automated tables and heavy shop cutting.
Pros
- 80-amp output with a 60 percent duty cycle
- Cuts up to 1-1/4-inch steel at 10 to 12 IPM
- PTM-80 machine torch with 24-foot cable and Euro quick-connect
- Adjustable post-flow control up to 50 seconds
- Tip saver pilot arc shutoff after 3 seconds of idle time
Cons
- Includes a machine torch only without a manual hand-held torch
- Weighs 53 pounds, making it less practical for mobile field jobs
Good fit if
- You need an 80-amp plasma power source for a CNC cutting table.
- You cut steel plate up to 1-1/4 inches thick.
- You require a machine torch with a long 24-foot reach.
Skip if
- You need a multi-process welder for MIG, TIG, or stick tasks.
- You need a handheld torch for freehand cutting.
Verdict: Everlast PowerPlasma 82i CNC Plasma Cutter delivers 80 amps of mechanized cutting power with a 60 percent duty cycle for thick steel fabrication. It is built specifically for automated table use where long reach and heavy cut capacities matter.
Everlast PowerPlasma 82i Plasma Cutter
Best for: Heavy 240V manual and CNC metal cutting
- Input Voltage
- 240V
- Weight
- 60 pounds
View on Amazon: Everlast PowerPlasma 82i Plasma Cutter Affiliate link
This 240V plasma cutter delivers 80 amps of output at a 60% duty cycle. You get an IPT-80 hand torch with a 14-foot cable, blow-back pilot arc for painted or rusted plate, and an ideal cutting capacity of 1 inch on steel. If you need clean cuts up to 1 1/4 inches and built-in CNC connectivity via a 12-pin port, this machine handles heavy workshop fabrication.
Pros
- 80A output rating at 60% duty cycle
- Blow-back pilot arc starts easily on painted or rusty metals
- Cuts up to 1 1/4 inches with 1-inch ideal steel cutting capacity
- Built-in 12-pin WEiPU SP21 CNC connector
- Adjustable post-flow control up to 50 seconds
Cons
- Requires 240V input with no 120V support
- Weighs 60 pounds
- Requires a separate air dryer to prevent torch damage
Good fit if
- You regularly cut steel up to 1 inch thick on 240V power.
- You need pilot-arc starting to slice through rusted or painted plate.
- You plan to integrate a cutting table via the 12-pin CNC port.
Skip if
- You need dual-voltage 120V/240V flexibility for mobile work.
- You want a lightweight portable unit under 60 pounds.
Verdict: Everlast PowerPlasma 82i Plasma Cutter provides robust 80A cutting output and CNC readiness for dedicated 240V shops. Its blow-back pilot arc and 1-inch regular steel capacity make it a dependable heavy-duty cutting tool.
Everlast LightningMTS 225 Multi-Process Welder
Best for: all-in-one multi-process aluminum and steel fabrication
- Welding Process
- TIG, Stick, MIG
- Amperage
- 200A
- Input Voltage
- Dual Voltage
- Current Type
- DC
- Features
- Pulse, Synergic Control
View on Amazon: Everlast LightningMTS 225 Multi-Process Welder Affiliate link
This multi-process machine combines MIG, Stick, and AC/DC Pulse TIG welding in a single digital inverter unit. It delivers up to 225 amps on 240V power and runs on standard 120V outlets with a reduced 125-amp ceiling. Synergic Power-Set controls help tune parameters quickly, while high-frequency arc starting handles aluminum TIG jobs cleanly. It suits you if you need complete multi-material fabrication capability across alternating and direct current processes in one footprint.
Pros
- Supports AC and DC TIG with pulse and high-frequency start for aluminum work
- Operates on dual-voltage 120V and 240V inputs
- Ships with MIG gun, TIG torch, foot pedal, and regulator included
- Features digital synergic Power-Set modes with manual parameter overrides
Cons
- Maximum output drops to 125 amps on 120V input
- Requires optional drive rolls to feed wire sizes above .030 inches
- Stick welding output limits you to 160 amps and 1/8-inch rods
Good fit if
- You need an all-in-one welder that handles aluminum TIG, MIG, and stick welding.
- You switch between standard 120V household outlets and 240V shop power.
- You want synergic presets with memory storage to recall favorite settings.
Skip if
- You run stick electrodes larger than 1/8 inch.
- You require more than 125 amps of welding output on 120V circuits.
Verdict: Everlast LightningMTS AC/DC Multi-Process Welder delivers comprehensive multi-process capability with dedicated AC/DC TIG controls and dual-voltage flexibility. It gives you complete aluminum and steel welding options in a single digitally controlled package.
Everlast 220V TIG Torch Water Cooler
Best for: cooling TIG torches on older Everlast units
- Welding Process
- TIG
- Input Voltage
- 220V
- Dimensions
- 18 × 10 × 14 inches
- Weight
- 30 pounds
View on Amazon: Everlast 220V TIG Torch Water Cooler Affiliate link
This cooling unit provides heat management for water-cooled TIG torches during extended welding. Operating on 220V input, the system utilizes an Italian-made stainless steel pump alongside a copper radiator and large fan to regulate temperatures. It measures 10 by 14 by 18 inches, weighs 30 pounds empty, and includes quick couplers for leak-resistant hose connections. It suits you if you need reliable torch cooling for an older Everlast welder.
Pros
- Italian-made stainless steel pump
- Copper radiator paired with a large cooling fan
- Quick couplers for leak-resistant torch connections
- Compact footprint measuring 10 by 18 inches
Cons
- Operates only on 220V power
- Incompatible with mounting locks on 2021 and newer models
- Weighs 30 pounds before fluid is added
Good fit if
- You run a water-cooled TIG torch on a 220V outlet.
- You have a 2020 or older Everlast welding machine.
Skip if
- You need a cooler that locks into 2021 or newer Everlast welders.
- You only have standard 110V power available.
Verdict: Everlast 220V TIG Torch Water Cooler provides dedicated cooling for water-cooled TIG torches using an Italian stainless steel pump and copper radiator. It requires 220V power and fits older Everlast welding units.
Everlast Water-Cooled Pulse TIG Stick Welder
Best for: Stationary shop fabrication on aluminum and steel
- Welding Process
- TIG, Stick
- Input Voltage
- 220V
- Current Type
- DC
- Features
- Pulse, IGBT Inverter
- Dimensions
- 22 × 9 × 17 inches
- Weight
- 65 pounds
View on Amazon: Everlast Water-Cooled Pulse TIG Stick Welder Affiliate link
This AC and DC pulsed TIG and stick machine runs on 220-volt single-phase or three-phase power. It delivers arc starts as low as 5 amps in both AC and DC modes for thin materials. The unit includes a 12-foot water-cooled 18-series TIG torch and allows high-frequency or lift arc starts. At 65 pounds, it suits dedicated shop setups needing stable low-amperage control on aluminum or steel.
Pros
- Low 5-amp start in AC and DC modes for thin metal work
- Supports both single-phase and three-phase 220V inputs
- Includes a 12-foot water-cooled 18-series TIG torch
- Offers both high-frequency and lift start options
Cons
- Requires a 220V supply with no 110V input option
- Weighs 65 pounds, limiting portability
Good fit if
- You need low-current arc starts down to 5 amps for thin workpieces.
- You have a dedicated 220V single-phase or three-phase power source.
- You plan to run a water-cooled torch setup in your shop.
Skip if
- You need 110V input power for standard household outlets.
- You want a lightweight machine for mobile field work.
Verdict: Everlast PowerTIG Pulse AC/DC Welder delivers precise low-amp arc starts and water-cooled capability for demanding shop fabrication. Its 220-volt power requirement and 65-pound weight keep it anchored to stationary workshop use.
Everlast 200A TIG and Plasma Cutter
Best for: combined AC/DC TIG welding and plasma cutting
- Welding Process
- TIG, Multi-Process
- Amperage
- 200A
- Current Type
- DC
- Features
- Plasma Cutter
- Weight
- 60 pounds
View on Amazon: Everlast 200A TIG and Plasma Cutter Affiliate link
This multi-process machine combines a 200A AC/DC TIG welder, a 200A stick welder, and a built-in 50A plasma cutter in one 60-pound unit. It uses Infineon IGBT inverter modules and includes pulse functionality. The integrated plasma cutter cuts steel up to 5/8-inch thickness, reaching 3/4 inch under optimal settings. You get dedicated warning indicators for duty cycle, over-current, and air pressure. It suits metalworkers needing cutting and welding in one box.
Pros
- 200A AC/DC TIG and 200A stick output
- Built-in 50A plasma cutter cuts up to 3/4-inch steel
- Infineon IGBT inverter modules with pulse functionality
- Safety indicators for duty cycle, over-current, and air pressure
Cons
- Weighs 60 pounds
- Does not include MIG welding functionality
Good fit if
- You need AC/DC TIG, stick, and plasma cutting in one machine.
- You cut steel up to 5/8 inch thick on jobsites.
- You want built-in safety alerts for air pressure and duty cycle.
Skip if
- You require MIG or flux-core welding processes.
- You need an ultra-compact welder under 50 pounds.
Verdict: Everlast PowerPro AC/DC TIG and Plasma Cutter delivers 200A welding and 50A cutting from a single power source. It is an efficient pick if you want both AC/DC TIG and plasma cutting without buying separate machines.
Everlast PowerTIG 185-Amp AC/DC Welder
Best for: dual-voltage AC/DC TIG and stick fabrication
- Welding Process
- TIG, Stick
- Input Voltage
- Dual Voltage
- Current Type
- AC/DC
- Features
- Foot Pedal
- Weight
- 40 pounds
View on Amazon: Everlast PowerTIG 185-Amp AC/DC Welder Affiliate link
The Everlast PowerTIG 185-Amp AC/DC Welder runs on 110V or 220V power for TIG and stick jobs. You get up to 185 amps of output from an IGBT inverter power source. It includes an AC/DC selector for aluminum and steel, plus a foot pedal. Pulse control offers 1 or 50 pulses per second. This unit suits you if you need a dual-voltage AC/DC machine for shop fabrication.
Pros
- Supports dual-voltage 110V and 220V power input
- Provides AC and DC output for TIG and stick welding
- Includes foot pedal for amperage control
- Features digitally controlled IGBT inverter arc stability
Cons
- Pulse frequency is limited to 1 or 50 pulses per second
- Weighs 40 pounds
- Lacks MIG welding capability
Good fit if
- You need dual-voltage 110V and 220V flexibility.
- You weld both steel and aluminum using AC/DC TIG.
- You want foot-pedal control included with the machine.
Skip if
- You require fully customizable pulse frequencies beyond fixed presets.
- You need a multi-process unit that includes MIG wire feeding.
Verdict: Everlast PowerTIG 185-Amp AC/DC Welder delivers dual-voltage flexibility and dedicated AC/DC TIG performance. It provides reliable inverter power and foot-pedal control for workshop fabrication.
Specifications side by side
| Spec | Everlast PowerTIG 200A AC/DC Welder | Everlast PowerTIG Dual Voltage TIG Welder | Everlast PowerTIG 210A TIG Stick Welder | Everlast Cyclone 140 110V MIG Welder | Everlast Typhoon AC/DC Pulse TIG Welder | Everlast PowerTIG 255EXT AC/DC TIG Welder | Everlast Thunder 215 Multi-Process Welder | Everlast Cyclone Dual-Voltage MIG Welder | Everlast PowerPlasma 82i CNC Plasma Cutter | Everlast PowerPlasma 82i Plasma Cutter | Everlast LightningMTS 225 Multi-Process Welder | Everlast 220V TIG Torch Water Cooler | Everlast Water-Cooled Pulse TIG Stick Welder | Everlast 200A TIG and Plasma Cutter | Everlast PowerTIG 185-Amp AC/DC Welder |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Welding Process | not stated | not stated | TIG, Stick | MIG, Flux Core | TIG, Stick | TIG, Stick | TIG, Stick, MIG, Multi-Process | Stick, MIG | not stated | not stated | TIG, Stick, MIG | TIG | TIG, Stick | TIG, Multi-Process | TIG, Stick |
| Amperage | 200A | not stated | not stated | 140A | not stated | not stated | 200A | 180A | not stated | not stated | 200A | not stated | not stated | 200A | not stated |
| Input Voltage | Dual Voltage | Dual Voltage | 220V | 110V | Dual Voltage | Dual Voltage | Dual Voltage | Dual Voltage | not stated | 240V | Dual Voltage | 220V | 220V | not stated | Dual Voltage |
| Current Type | AC/DC | not stated | DC | not stated | AC/DC | AC/DC | not stated | not stated | not stated | not stated | DC | not stated | DC | DC | AC/DC |
| Features | Pulse | Foot Pedal | Pulse, IGBT Inverter | not stated | Pulse, IGBT Inverter | Pulse | not stated | IGBT Inverter | Plasma Cutter | not stated | Pulse, Synergic Control | not stated | Pulse, IGBT Inverter | Plasma Cutter | Foot Pedal |
| Application | not stated | not stated | not stated | Home | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Dimensions | 24 × 9 × 17 inches | 25 × 5 × 14 inches | 24 × 9 × 17 inches | 17 × 8 × 14 inches | not stated | not stated | not stated | not stated | 22 × 9 × 17 inches | not stated | not stated | 18 × 10 × 14 inches | 22 × 9 × 17 inches | not stated | not stated |
| Weight | 60 pounds | 40 pounds | 60 pounds | 25 pounds | 65 pounds | 85 pounds | 57.1 pounds | not stated | 53 pounds | 60 pounds | not stated | 30 pounds | 65 pounds | 60 pounds | 40 pounds |
| Color | Green | Green | Green | not stated | not stated | Green | not stated | not stated | Green | Green | not stated | Green | Green | Green | Green |
| Model | PT200dv | PowerTig 185DV | PT210EXTT | i-mig140e | TYPHOON230 | PT255EXT-D | PowerMTS211Si | not stated | PP80S | PP80S' | not stated | PowerCoolW300 | PowerTIG-250EX | PowerPro205Si | PowerTig 185 |
| Size | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | Water-cooled torch | not stated | not stated |
Everlast Welders Canada Lineup at a Glance
This list covers 15 models from Everlast Welders Canada, ranked by their published specifications. You can group these machines by welding process. The PowerTIG 200A AC/DC Welder and PowerTIG Dual Voltage TIG Welder serve TIG specialists. The Cyclone 140 110V MIG Welder suits DIYers needing 110V flexibility. The PowerPlasma 82i CNC Plasma Cutter targets thick steel cutting. Other options like the Thunder 215 offer multi-process versatility. Compare amperage, input voltage, and features to find your match.
Who Everlast Welders Canada Fits
Everlast Welders Canada suits makers who need specific process control. The range spans from 25-pound, 110V DIY units like the Cyclone 140 to 85-pound, dual-voltage professional machines like the PowerTIG 255EXT. You can find dedicated plasma cutters for thick steel or multi-process welders for aluminum and steel. However, the lineup focuses heavily on stationary workshop use. Most units weigh over 40 pounds and require 220V or dual-voltage inputs. You will not find lightweight, portable, single-phase 110V TIG welders for field work. The brand also lacks compact, low-amperage Stick-only options for small repairs. Your choice depends on whether you need high-duty-cycle fabrication or basic home maintenance.
If you need shop desk hardware, our spec guide covers the best redragon mechanical keyboards with volume knob.
How to choose the right welder
-
Match the welding process
Select the machine based on the specific welding process you need most often. TIG welding requires precise control for aluminum and thin steel, while MIG is better for thicker materials. If you need versatility, look for multi-process units like the Thunder 215, which handles TIG, Stick, and MIG. The Cyclone 140 focuses on MIG and flux core for home use. Plasma cutters like the PowerPlasma 82i are dedicated tools for cutting metal rather than joining it. Choose based on your primary task to avoid buying unnecessary features.
-
Check input voltage needs
Ensure the welder matches your available power supply. Dual-voltage models like the PowerTIG 200A and Cyclone Dual-Voltage offer flexibility, allowing you to use 110V or 220V outlets. This is crucial for shops with limited power infrastructure. Some machines, like the PowerTIG 210A, are fixed to 220V, which limits portability. The Cyclone 140 runs on 110V, making it suitable for standard home circuits. Verify your outlet type before purchasing to ensure the unit can operate safely and effectively without requiring expensive electrical upgrades.
-
Evaluate amperage range
Amperage determines the thickness of metal you can weld. Higher amps handle thicker materials. The PowerTIG 255EXT offers 255 amps for heavy fabrication, while the Cyclone 140 provides 140 amps for lighter DIY work. The Typhoon 230 delivers high-duty-cycle performance for professional use. Match the amperage to your typical material thickness. Too little power struggles with thick steel, while excessive power may burn through thin sheet metal. Check the maximum output to ensure the machine covers your heaviest expected projects without limitation.
-
Consider current type options
AC/DC current types are essential for welding aluminum. AC current cleans oxide layers on aluminum, while DC is standard for steel. The PowerTIG 200A and Typhoon 230 support both AC and DC, making them ideal for mixed material shops. The Thunder 215 is DC-only, which limits its use for non-ferrous metals. If you plan to work with aluminum frequently, prioritize machines with AC capability. This specification directly impacts your ability to weld different metals effectively without switching equipment.
-
Review weight and size
Weight affects portability and workspace stability. Lighter units like the Cyclone 140 at 25 pounds are easy to move around a home garage. Heavier machines like the PowerTIG 255EXT at 85 pounds stay stationary, providing stability during high-amperage welding. Consider your workspace layout. If you need to transport the welder to job sites, choose a lighter model. For a fixed workshop bench, a heavier unit may offer better durability and heat dissipation during long welding sessions.
-
Assess duty cycle limits
Duty cycle defines how long a welder can run at a given amperage before cooling down. The PowerPlasma 82i features a 60 percent duty cycle, suitable for continuous CNC cutting. Welders with lower duty cycles require more rest periods during extended use. Check the specifications for duty cycle ratings at your typical amperage settings. High-duty-cycle machines are better for professional environments where continuous operation is necessary. This spec ensures you do not overheat the unit during prolonged fabrication tasks.
Frequently asked questions
Which Everlast welder is best for aluminum TIG welding?
The Everlast PowerTIG 200A AC/DC Welder is the top pick for versatile aluminum fabrication. It delivers 200 amps with dual-voltage input and AC/DC current types. This model includes pulse features for precise arc control. You get dependable starts and adjustable pulse settings across both AC and DC tasks, making it ideal for workshop aluminum work.
What is the lightest Everlast welder for home use?
The Everlast Cyclone 140 110V MIG Welder is the lightest option at 25 pounds. It operates on 110V power and provides 140 amps of output. This compact unit supports MIG and flux core processes with stepless adjustment. Its small footprint and low weight make it a practical choice for DIY projects in home workshops.
Does Everlast make a welder for CNC plasma cutting?
Yes, the Everlast PowerPlasma 82i CNC Plasma Cutter is designed for automated table use. It delivers 80 amps of cutting power with a 60 percent duty cycle. This machine is built for thick steel fabrication on CNC tables. You get heavy cut capacities and long reach capabilities suited for mechanized cutting operations.
Which Everlast model offers synergic control for multi-process welding?
The Everlast LightningMTS 225 Multi-Process Welder features synergic control for comprehensive multi-process capability. It supports TIG, Stick, and MIG welding with dual-voltage flexibility. This digitally controlled package provides dedicated AC/DC TIG controls. You get complete aluminum and steel welding options in a single unit with 200-amp output.
What is the highest amperage Everlast welder available?
The Everlast PowerTIG 255EXT AC/DC TIG Welder offers the highest amperage at 255 amps. It provides deep parameter control with dual-voltage flexibility and four AC waveforms. This machine supports TIG and Stick processes with low-amp starts. You get specialized arc shaping for advanced aluminum welding and a heavy 85-pound frame.
Can I use an Everlast welder for both TIG and Stick welding?
Several models support both TIG and Stick welding processes. The Everlast PowerTIG 210A TIG Stick Welder handles precise AC and DC TIG pulse welding alongside Stick tasks. It includes pulse features and IGBT inverter technology. You get comprehensive waveform shaping and digital pulse parameters for repeatable memory presets and reduced heat input.
Is there an Everlast welder that runs on 110V?
The Everlast Cyclone 140 110V MIG Welder runs on 110V power. It delivers 140 amps and supports MIG and flux core processes. This unit features stepless adjustment and spool gun compatibility. Its compact 25-pound design makes it suitable for home use where standard outlets are available.
Which Everlast welder is best for heavy-duty professional TIG work?
The Everlast Typhoon 230 TIG/Stick Welder is built for professional TIG performance. It offers high-duty-cycle TIG capability with versatile AC waveform control. This dual-voltage machine supports TIG and Stick processes with pulse features. You get a heavy, process-specific tool designed for serious TIG and Stick work in professional settings.